|
|
|
|
|
|
|
TC-2S SOFTWOOD FASTENER:
|
|
|
|
PRODUCT DESCRIPTIONS
|
|
Heavy Gauge Stainless Steel with black oxide coating to better hide fastener between boards.
|
| |
|
PRODUCT REQUIREMENTS
|
|
When using Tiger Claw fasteners please review and comply with these requirements to obtain proper installation. Failure to follow these requirements may result in deck failure and/or void of warranty.
Inspect decking material prior to installation. Omit any planks that contain hooks, twists, splits, cracks, or other defects. It is recommended to Always install decking with the crown upward.
When using:
Recommended for use in softwood decking measuring 1” or thicker lumber. Softwood decking will inherently experience shrinkage. When using decking material prone to high shrinkage, decking should be installed tightly together allowing shrinkage to provide gap over time. Shrinkage of decking board width must be limited to a maximum of 1/4". Ask your lumber provider for information on expected expansion and/or contraction of material for your particular climate. Product Specifications. |
| |
|
PRODUCT FEATURES & COMPATIBILITY
|
|
TC-2S is ideal for soft and low density woods*, 5/4” to 2” in all environments, including harsh or coastal environments.
* TC-2S will work in the following decking lumber varieties:
- Atlantic White Cedar
- Cedar
- Coast Fir
- Douglas Fir
- Eastern Spruce
- Eastern White Cedar
- Port Orford Cedar
- Southern Yellow Pine
- Pressure Treated Lumber
- Western Red Cedar
- Western Redwood
- Yellow Cedar
Please consult your lumber professional or ask us for recommendations first if you plan to use any of the following uncommon woods in your decking project:
* Do NOT use TC-2S with:
- Composite Decking
- Ironwoods or Mahogany
- Cellular PVC Decking
Lost your instructions? No problem! Just click here and print another copy. |
| |
|
PRODUCT SPECIFICATIONS
|
|
Brand name
|
TC-2S: Coated stainless steel hidden deck fastener
|
|
|
|
|
Origin
|
Connecticut , USA
|
|
|
|
|
Recommended Materials
|
Use with any softwood decking no less than 1” in thickness like pressure treated, white cedar, red cedar, western redwood
|
|
|
|
|
Appearance
|
Semi gloss black finish, rectangular body with circle top V shaped hole in center. Two sets of large opposing prongs on top, one set of small prongs extending from bottom of body.
|
|
|
|
|
Dimensions
|
.663” h x 1.67” w x 1.25” d
|
|
|
|
|
Material
|
.060 304-2B annealed stainless steel (Non-magnetic)
Yield strength 45.5 kpsi
Tensile strength 101.7 kpsi
Or:
.060 201-2B annealed stainless steel (Non-magnetic)
Yield strength 55 kpsi
Tensile strength 110 kpsi
|
|
|
|
|
Finish
|
Black oxide with sealer topcoat
|
|
|
|
|
Workability
|
All work can be done quickly from above using basic tools (hammer, screw gun, sledge hammer…)
|
|
|
|
|
Gapping
|
Boards should be installed tight together and allowed to “shrink gap” over time.
|
|
|
|
|
Expansion / Contraction
|
Fasteners are designed to allow wood decking to expand and contract naturally by sliding on the fastener prongs and still maintain hold down strength. From the original point of installation TC-2S can handle up the ¼” of contraction.
|
|
|
|
|
Recommended Screw Used
|
Quality Stainless steel # 8 x 2” bugle head decking screw. Included in each box and project pail.
|
|
|
|
|
Packaging
|
90 pieces per box (SKU # F-4387-2SRB)
12 – 90 piece boxes per case
900 pieces per bucket (SKU # F-4394-2SCB)
(Stainless Steel Black Oxide Screws Included)
|
|
|
|
|
Package Content
|
Retail Box: (90) Tiger Claw fasteners (90) #8x2” stainless steel screws. (1) Installation instruction sheet (1) Installation Block (1) Support Addendum (1) #2 Sq. Drive bit
Project Pail: (900) Tiger Claw Fasteners (900) #8x2” stainless steel screws (2) Installation instruction sheet (2) support addendums (6) Installation Blocks, (4) #2 Sq. drive bit (1) Instructional DVD, (1) Increasing Profits, (1) Tiger Flyer
|
|
|
|
|
Retail Unit Dimensions
|
(900 Piece Bucket): 12” dia. x 11” h, 32.2 lbs.
(1400 Piece Bucket): 12” Dia. x 15” h. 38.8 lbs.
|
|
|
|
|
Coverage
|
A fastener is needed at every intersection of a joist and decking board.
When using 5.5” decking with 16” on center joists:
90 pcs. box covers aprox. 50 sq. ft.
900 pcs. box covers aprox. 500 sq. ft.
Square footage x 1.75 = # Fasteners
For other configurations:
# Decking boards x # Supports = # Fasteners
# Fasteners / 90 = # Boxes (round up to next box)
|
|
|
|
|
|
|
|
|
|
